Bandwidth · subscription · no rental term

TRON bandwidth for every transfer

Connect an address once: while the subscription is on, it has bandwidth for a transfer of USDT, TRX or any TRC-20 token and the network burns no TRX for it. There is no rental term — switch the subscription off and we stop watching the address.

Connect an addressSign-in and sign-up are one form — straight to connecting after you sign in
  • No rental term
  • 1 — 5,000 BW per transfer
  • Auto-pause

5 USDT transfers in a day

bandwidth on the addressTRX burned
Without a subscriptionburned ~1.4 TRX
  1. bandwidth on the address
  2. TRX burned
  3. TRX burned
  4. TRX burned
  5. TRX burned
With Auto-Bandwidthburned 0 TRX
  1. bandwidth on the address
  2. bandwidth on the address
  3. bandwidth on the address
  4. bandwidth on the address
  5. bandwidth on the address
Free per day600 BW
USDT transfer~345 BW

How Auto-Bandwidth works

  1. 01

    Connect an address

    Enter the address your transfers go out from — USDT, TRX, USDD or your own TRC-20 token — and how much bandwidth one transfer needs.

  2. 02

    Bandwidth on the address

    While the subscription is on, the address has bandwidth for a transfer — the network burns no TRX for it.

  3. 03

    No rental term

    Switch the subscription off at any time and we stop watching the address. Switch it back on and the bandwidth is there again.

What you set

BW per transfer

From 1 to 5,000. We fill it in for the token: 350 for USDT, USDD and a regular TRC-20 (a transfer uses about 345 BW), 300 for TRX (about 270 BW). You can enter your own number.

Auto-pause

While the address has enough free bandwidth for a transfer, the subscription can stay paused — and switches itself back on when there is less.

Token

USDT, TRX, USDD or any TRC-20 token: pick “Smart contract” and paste the contract address — we check it on-chain and fill in its name and transfer usage.

Auto-Bandwidth gives no energy — bandwidth only. Energy for every USDT transfer is in USDT Auto-Energy.

How it differs from other options

Auto-Bandwidth

A subscription with no rental term: bandwidth for every transfer while it is on. For addresses that send USDT every day.

Buying bandwidth

An amount for the term you choose — handy for a one-off batch of transfers.

Auto refill

Watches the energy or bandwidth level on the address and buys more when it drops below the threshold.

Who it's for

Hot wallets

Exchanges, swap services and payment services paying out USDT throughout the day.

Several transfers a day

The free 600 BW cover about one USDT transfer a day. From the second one, the network burns ~0.35 TRX for each.

Payout services

Payroll, affiliate and referral payouts in USDT from one address.

Frequently asked questions

How is Auto-Bandwidth different from buying bandwidth?

A purchase gives you an amount for a rental term. A subscription has no term: while it is on, the address has bandwidth for every USDT transfer. Switch it off and we stop watching the address.

How much does it cost?

A day plus a transfer. The day is charged in advance and only while bandwidth stays on the address — none while paused or on auto-pause. You pay for a transfer only when it used our bandwidth; a transfer covered by the address’s free bandwidth is free. You will see the price for your amount in the form before connecting.

How much bandwidth does a transfer need?

USDT, USDD and a regular TRC-20 token use about 345 BW, so we fill in 350; TRX uses about 270 BW, so we fill in 300. You can set anywhere from 1 to 5,000 BW per transfer.

Why subscribe if the network gives free bandwidth?

The network restores 600 BW a day to each address — about one USDT transfer. From the second transfer, about 0.35 TRX is burned for bandwidth. While the free bandwidth is enough, auto-pause can hold the subscription.

What happens if my balance runs short of TRX?

The subscription stops and we take the bandwidth off the address — no debt is left. Once you top up, the subscription switches itself back on.

Does the subscription give energy?

No, bandwidth only. Energy for every USDT transfer is in USDT Auto-Energy.

Can I connect an address that already uses USDT Auto-Energy?

Not if the address has the bandwidth guarantee of USDT Auto-Energy or of a transfer package on — it already gets bandwidth from there. Energy and bandwidth orders and auto refill on the same address do not get in the way.

Can I connect an address that is not activated yet?

Yes. We activate it on the network when you connect it and charge the activation once from your balance.

Which transfers does the subscription cover?

Transfers of any token from the address: USDT, TRX, USDD or your own TRC-20. The amount is sized for the token you pick, and you can change it. We renew the bandwidth after any use of our bandwidth on the address: right after a USDT transfer, within a minute after other transactions. A TRX transfer to a new, not yet activated address still burns the network's 1 TRX fee — bandwidth doesn't cover it.

Can I connect my own TRC-20 token?

Yes. In the token picker choose “Smart contract” and paste the contract address: we check on-chain that it is a TRC-20 token and fill in its name and transfer usage. The contract is saved to your list, and you can remove it there.

How do I switch the subscription off?

With the switch on the address card in the dashboard. There is no rental term: switch it off and we stop watching the address.

Bandwidth for every transfer — connect an address once, no rental term.

Connect an address